ข้อมูลผลิตภัณฑ์

• EAP211-BRIDGE คู่มือการติดตั้ง + Controller Software - WEB (1.97 MB)

ประเภทอุปกรณ์

• อุปกรณ์กระจายสัญญาณไร้สายภายนอกอาคารเซ็ตคู่ ความถี่ 5GHz ความเร็ว 867Mbps IEEE 802.11 a/b/g/n/ac พอร์ทแลน 3x 1Gbps จ่ายไฟฟ้าผ่านสายแลนแบบ Passive 24V หรือผ่าน Adepter 12VDC พร้อมชุดยึดติดตั้ง เสาอากาศภายในแบบ 2× 2 dBi กวาดซ้ายขวาบนล่าง 70องศา รับส่งไม่เกิน 1km บริหารจัดการผ่านซอฟต์แวร์ EAP Controller
  ** ภายในกล่องแถม PoE injector **

HARDWARE FEATURES

• Interface 3x Gigabit Ethernet Ports*6
• Button Reset
• Power Supply 12V DC / 24V Passive PoE (Passive PoE adapter included.)
• Power Consumption 11.5W
• Dimensions ( W x D x H ) 3.1 x 2.4 x 8.8 in (79 × 60 × 224 mm)
• Antenna Type
  Internal 2×2 Dual-polarized directional MIMO antennas
  5 GHz: 7.0 dBi
  Horizontal:70°, Vertical: 70°
• Weatherproof Enclosure IP65
• Mounting Pole Mounting (Accessories included)

WIRELESS FEATURES

• Coverage 1000m(3280ft)5
• Wireless Standards IEEE 802.11 a/b/g/n/ac
• Frequency 5 GHz
• Signal Rate 5 GHz: Up to 867 Mbps
• Wireless Functions
  • Mesh*4
  • MU-MIMO: 5G 2x2 MU-MIMO DL
  • Load Balance
  • Seamless Roaming(802.11r)
  • Beamforming
  • Airtime Fairness
  • Multiple SSIDs:8
  • Wireless Statistics
  • Wireless Schedule
  • Reboot Schedule
  • RADIUS Accounting
  • MAC Authentication
  • Static IP/Dynamic IP
• Wireless Security
  • VLAN
  • Access Control
  • Rogue AP Detection
  • Captive Portal Authentication*4
  • Maximum number of MAC Filter: 4,000
  • WPA-Personal/Enterprise, WPA2-Personal/Enterprise
• Transmission Power
  • CE:
  <23dBm (5 GHz, band 1/2, EIRP);
  <28.5dBm (5 GHz, band3, EIRP)
  • FCC:
  <22dBm (5 GHz, band1/4)

MANAGEMENT

• Omada App Yes
• Restore & Backup Yes
• Firmware update via Web Yes
• NTP Yes
• Centralized Management
  • Omada Hardware Controller (OC300)
  • Omada Hardware Controller (OC200)
  • Omada Software Controller
  • Omada Cloud-Based Controller
• Cloud Access Yes. Require the use of OC300, OC200, the Omada Software Controller, or Omada Cloud-Based Controller.
• LED ON/OFF Control Yes
• Management MAC Access Control Yes
• SNMP v1, v2c, v3
• SSH Yes
• Web-based Management Yes

OTHERS

• Certification CE, FCC, RoHS
• Package Contents
  • EAP211-Bridge KIT
  • Passive PoE Adapter
  • Power Cord
  • Installation Guide
  • Mounting Kit
• Environment
  • Operating Temperature: -40 °C–70 °C (-40 °F–158 °F);
  • Storage Temperature: -40 °C–70 °C (-40 °F–158 °F);
  • Operating Humidity: 10%–90% non-condensing;
  • Storage Humidity: 5%–90% non-condensing

1. Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications, along with the number of connected devices, were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles; 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection quality, and client condition.
2. All products are tested in real outdoor environments. Actual range and throughput depend on the transmission power and environmental factors such as wireless interference, obstacles, weather, etc.
3. Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding, and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
4. These functions require the use of an Omada SDN controller.
5. Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
6. Non-Omada devices connected to the wired LAN ports will not be recognized by the Omada controllers, preventing users from viewing their connection status. To address this issue, connect those non-Omada devices to an Omada switch that links to the bridge is wired LAN ports.